Additional Parts
================

USBoard-USS5-IP Connectors
--------------------------

.. note::
   An overview of the connectors for the USBoard-USS5-IP can be found at :ref:`uss5ip-connectors`.

A complete connector set for the USBoard-USS5-IP can be ordered from
Neobotix under order number X222 for customers who want to manufacture
the cable set themselves.



USBoard-USS5-IP Configuration Cable
-----------------------------------

Neobotix offers a standard cable set (X221) for first tests of the USBoard-USS5-IP.
This cable set features cables of 1 m length for up to four sensors.
All other cables are also 1 m long.

The connection layout is as follows:

+-----------------------+-----+---------------------+
| Connection            | Pin | Description         |
+=======================+=====+=====================+
| 1 x Red               | \+  | Power               |
+-----------------------+-----+---------------------+
| 1 x Black             | \-  | Ground              |
+-----------------------+-----+---------------------+
| 2 x Brown             |     | Warning Relay       |
+-----------------------+-----+---------------------+
| 2 x Yellow            |     | Alarm Relay         |
+-----------------------+-----+---------------------+
| D-Sub 9 "RS-232"      | 2   | Transmit Line (TxD) |
+                       +-----+---------------------+
|                       | 3   | Receive Line (RxD)  |
+                       +-----+---------------------+
|                       | 5   | Ground              |
+-----------------------+-----+---------------------+
| D-Sub 9 "CAN1"/"CAN2" | 2   | CAN Low             |
+                       +-----+---------------------+
|                       | 3   | CAN High            |
+                       +-----+---------------------+
|                       | 7   | CAN Ground          |
+-----------------------+-----+---------------------+


Primary Cable Set
-----------------

We also offer a complete cable set for the 30 pin primary connector with order number X223.
The basic cables are identical to the configuration cable.
The only difference is that the primary cable set features eight sensor cables of 2 m each.
Other cable lengths (up to 25 m) and designs are available on request.


Secondary Cable Set
-------------------

Customers who want to use more than eight sensors can order our secondary cable set (X224).
This provides another eight sensor cables of 2 m length.
Other cable lengths (up to 25 m) and designs are available on request.


Sensors
-------

The USBoard-USS5-IP uses the same sensors as the USBoard-USS5.
You can find more information and the part numbers in its documentation at :ref:`uss5-additional-parts-sensors`.